Title: Aruba 2930M 24G 1-Slot Switch Technical Support & Configuration Guide
Content:
Aruba 2930M 24G 1-Slot Switch Overview
The Aruba 2930M is a high-performance, 24-port Gigabit Ethernet switch with a dedicated 1-port 10/25G SFP28 module (24Gbps bandwidth). It supports POE+/PoE++ (up to 90W per port), stacking, and SDN integration. Ideal for enterprise networks requiring scalability and energy efficiency.
Common Issues & Solutions
Port Speed Configuration
Problem: Ports not operating at 10/25G.
Fix:
# Enter configuration mode
configure
# Enable 10/25G on port 24 (example)
port 24
speed 25g
mode auto
exit
commit
Stacking Configuration
Steps:
Ensure all switches are in Access mode.
Use a Stack Master to initialize stacking:
system-node-major
system-node-minor <node-index>
Verify stacking status:
show stacking
Power Supply Issues
Check:
Use show system power to monitor power usage.
Replace faulty PSUs if total power exceeds 400W (24x30W + 1x90W = 810W max).
MAC Address Filtering
Enable:
security mac-address MAC-Address allow
Indian Market Considerations
Compliance: Ensure adherence to BSNL/Tata network standards for interoperability.
Roaming Support: Configure 802.11ax for high-density Indian public Wi-Fi deployments.
Language Support: Use language en_IN for local setup guides.
Troubleshooting CLI Commands
| Command | Purpose |
|------------------------|----------------------------------|
| show interfaces status | Check port status |
| debug counter all | Diagnose traffic drops |
| show system resources | Monitor CPU/RAM usage |
Need help with a specific configuration or error? Provide more details for targeted support!
Let me know if you need further clarification or assistance! 😊
|
